Log in
New Cart 0
Filter
Most Viewed

Lay end-cutters

Failed to add some of the products to cart.

Name and Code
In Stock
Price gross
Change Cart
Automatic lay end-cutter

Automatic lay end-cutter

DAYANG DYDB-2 2.5M DAYANG DYDB-2 2.5M | 225 | 200 | 230 | 250 |
Automatic lay end-cutter
ATTENTION our cutters are equipped with 2nd, job facilitating, rear cloth press, what make them different from competitive cutters equipped only with front press. During comparing prices, check exactly what you will get in the return. The set consists of: cutter and material feeder, automatic layers counter, rear cloth press, front cloth press rail with the cutter runner. Cloth press rails are 250 cm long in standard what enables assembling on a table 225 cm maximum wide or smaller. The device c
ATTENTION our cutters are equipped with 2nd, job facilitating, rear cloth press, what make them different from competitive cutters equipped only with front press. During comparing prices, check exactly what you will get in the return. The set consists of: cutter and material feeder, automatic layers counter, rear cloth press, front cloth press rail with the cutter runner. Cloth press rails are 250 cm long in standard what enables assembling on a table 225 cm maximum wide or smaller. The device c
Max. table width cm
225
Power of lay end-cutter [W]
200
Power supply [V]
230
Rail length [cm]
250
Brand
Dayang
Weight
72 kg
In Stock
Not Available Not Available
Availability
In Stock Od ręki
Availability Time
Od ręki
In Stock:
Not Available

5 225,37 zł

gross
Total (gross)

5 225,37

Enter quantity
Quantity must be included in range 0,01 - 999999
Quantity cannot be more than 999999
pcs
Change Cart
Max. table width cm
225
Power of lay end-cutter [W]
200
Power supply [V]
230
Rail length [cm]
250
Manual lay end-cutter

Manual lay end-cutter

DAYANG DYDB-1 2.6M DAYANG DYDB-1 2.6M | 230 | 160 | 230 | 260 |
Manual lay end-cutter
ATTENTION our cutters are equipped with 2nd, job facilitating, rear cloth press, what make them different from competitive cutters equipped only with front press. During comparing prices, check exactly what you will get in the return. The set consists of: cutter and material feeder, automatic layers counter, rear cloth press, front cloth press rail with the cutter runner. Cloth press rails are 260 cm long in standard what enables assembling on a table 230 cm maximum wide or smaller. The device c
ATTENTION our cutters are equipped with 2nd, job facilitating, rear cloth press, what make them different from competitive cutters equipped only with front press. During comparing prices, check exactly what you will get in the return. The set consists of: cutter and material feeder, automatic layers counter, rear cloth press, front cloth press rail with the cutter runner. Cloth press rails are 260 cm long in standard what enables assembling on a table 230 cm maximum wide or smaller. The device c
Max. table width cm
230
Power of lay end-cutter [W]
160
Power supply [V]
230
Rail length [cm]
260
Brand
Dayang
Weight
37 kg
In Stock
Not Available Not Available
Availability
In Stock Od ręki
Availability Time
Od ręki
In Stock:
Not Available

2 431,61 zł

gross
Total (gross)

2 431,61

Enter quantity
Quantity must be included in range 0,01 - 999999
Quantity cannot be more than 999999
pcs
Change Cart
Max. table width cm
230
Power of lay end-cutter [W]
160
Power supply [V]
230
Rail length [cm]
260
Automatic lay end-cutter

Automatic lay end-cutter

DAYANG DYDB-2 3.6M DAYANG DYDB-2 3.6M | 335 | 230 |
Automatic lay end-cutter
The set consists of: cutter and material feeder, automatic layers counter, rear cloth press, front cloth press rail with the cutter runner. Cloth press rails are 360cms long in standard what enables assembling on a table 335cms maximum wide or smaller. The width of the fabric is 330 cm. The device cuts precisely and presses the material, cutting width and front rail lifting height can be adjusted, automatic or manual front rail lifting. You save material and labour cost. Voltage 230 V, motor pow
The set consists of: cutter and material feeder, automatic layers counter, rear cloth press, front cloth press rail with the cutter runner. Cloth press rails are 360cms long in standard what enables assembling on a table 335cms maximum wide or smaller. The width of the fabric is 330 cm. The device cuts precisely and presses the material, cutting width and front rail lifting height can be adjusted, automatic or manual front rail lifting. You save material and labour cost. Voltage 230 V, motor pow
Max. table width cm
335
Power supply [V]
230
Brand
Dayang
Weight
72 kg
In Stock
Average Quantity Average Quantity
Availability
In Stock Od ręki
Availability Time
Od ręki
In Stock:
Average Quantity

5 856,56 zł

gross
Total (gross)

5 856,56

Enter quantity
Quantity must be included in range 0,01 - 999999
Quantity cannot be more than 999999
pcs
Change Cart
Max. table width cm
335
Power supply [V]
230
Automatic lay end-cutter with pressure adjustment

Automatic lay end-cutter with pressure adjustment

DAYANG DYDB-3 2.5M DAYANG DYDB-3 2.5M | 220 | 200 | 230 | 250 |
Automatic lay end-cutter with pressure adjustment
ATTENTION our cutters are equipped with 2nd, job facilitating, rear cloth press, what make them different from competitive cutters equipped only with front press. During comparing prices, check exactly what you will get in the return. The set consists of: cutter and material feeder, automatic layers counter, rear cloth press, front cloth press rail with the cutter runner.Cloth press rails are 250cms long in standard what enables assembling on a table 220cms maximum wide or smaller. The device cu
ATTENTION our cutters are equipped with 2nd, job facilitating, rear cloth press, what make them different from competitive cutters equipped only with front press. During comparing prices, check exactly what you will get in the return. The set consists of: cutter and material feeder, automatic layers counter, rear cloth press, front cloth press rail with the cutter runner.Cloth press rails are 250cms long in standard what enables assembling on a table 220cms maximum wide or smaller. The device cu
Max. table width cm
220
Power of lay end-cutter [W]
200
Power supply [V]
230
Rail length [cm]
250
Brand
Dayang
Weight
70 kg
In Stock
Not Available Not Available
Availability
In Stock Od ręki
Availability Time
Od ręki
In Stock:
Not Available

8 484,77 zł

gross
Total (gross)

8 484,77

Enter quantity
Quantity must be included in range 0,01 - 999999
Quantity cannot be more than 999999
pcs
Change Cart
Max. table width cm
220
Power of lay end-cutter [W]
200
Power supply [V]
230
Rail length [cm]
250
Manual lay end-cutter with short handle

Manual lay end-cutter with short handle

DAYANG DYDB-1 2.6M SH DAYANG DYDB-1 2.6M SH | 230 | 160 | 230 | 260 |
Manual lay end-cutter with short handle
ATTENTION our cutters are equipped with 2nd, job facilitating, rear cloth press, what make them different from competitive cutters equipped only with front press. During comparing prices, check exactly what you will get in the return. The set consists of: cutter and material feeder, automatic layers counter, rear cloth press, front cloth press rail with the cutter runner. Cloth press rails are 260 cm long in standard what enables assembling on a table 230 cm maximum wide or smaller. The device c
ATTENTION our cutters are equipped with 2nd, job facilitating, rear cloth press, what make them different from competitive cutters equipped only with front press. During comparing prices, check exactly what you will get in the return. The set consists of: cutter and material feeder, automatic layers counter, rear cloth press, front cloth press rail with the cutter runner. Cloth press rails are 260 cm long in standard what enables assembling on a table 230 cm maximum wide or smaller. The device c
Max. table width cm
230
Power of lay end-cutter [W]
160
Power supply [V]
230
Rail length [cm]
260
Brand
Dayang
Weight
37 kg
In Stock
Not Available Not Available
Availability
In Stock Od ręki
Availability Time
Od ręki
In Stock:
Not Available

2 431,61 zł

gross
Total (gross)

2 431,61

Enter quantity
Quantity must be included in range 0,01 - 999999
Quantity cannot be more than 999999
pcs
Change Cart
Max. table width cm
230
Power of lay end-cutter [W]
160
Power supply [V]
230
Rail length [cm]
260
Added To Cart
Added To Cart