Accessories

Automatic cutter blade TAKATORI TAC . Cutter blade with dimensions of 174 x 8 x 2.0 mm. Maximum cutting height 80 mm.

Knife height: 25 mm Thickness: 0,60 mm Max. cutting depth: 8,7 mm Knife type: Oscillating Angle: 22/63° Composition: Tungsten Carbide - HM -Hard Metal. Suitable for cutting: Carbon fibers, Corrugated cardboard, Felt, Glass fibers, Leather, Non-woven fabric, Nylon fabric, Polyester fabric, Rubber

Knife diameter: 32 mm Thickness: 0,63 mm Max. cutting depth: 7 mm Knife type: Rotary Composition: Tungsten Carbide - HM -Hard Metal - Solid Carbide Suitable for cutting: Aramid fibers, Carbon fibers, Felt, Glass fibers, Non-woven fabric, Nylon fabric, Polyester fabric, Textiles

Reduces loss of pressure, noise, prevents increase of power consumption after cutting operation.

Knife height: 28 mm Thickness: 0,60 mm Max. cutting depth: 13,20 mm Knife type: Oscillating Angle: 15/80° Composition: Tungsten Carbide - HM -Hard Metal. Suitable for cutting: Aramid fibers, Carbon fibers, Corrugated cardboard, Felt, Foam board, Leather, Non-woven fabric, Nylon fabric, Polyester fabric, Textiles

Knife height: 28 mm Thickness: 0,60 mm Max. cutting depth: 7,8 mm Knife type: Oscillating Angle: 15/55° Composition: Tungsten Carbide - HM -Hard Metal. Suitable for cutting: Aramid fibers, Carbon fibers, Corrugated cardboard, Felt, Foam board, Leather, Polyester fabric

Knife diameter: 28 mm Thickness: 0,60 mm Max. cutting depth: 5 mm Knife type: Rotary Composition: Tungsten Carbide - HM -Hard Metal. Suitable for cutting: Aramid fibers, Carbon fibers, Felt, Glass fibers, Non-woven fabric, Nylon fabric, Polyester fabric, Textiles

Blade for TAKATORI TAC cutter. Automatic cutter blade, dimensions 130 x 6 x 1.6 mm, with a maximum cutting height of 50 mm.

Cartridge 45 HP equivalent. Black color, capacity 42 ml, yield about 830 A4 pages, according to HP standards. Designed for plotters Audaces Jet Lux, DOT, Pop Jet and for printers HP Deskjet, Photosmart, Designjet oraz Officejet.

Cellulose paper 68 gr/m2, with a special glue, suitable for all kind of machines, sealer inside, standard roll length: 280 mts, inner core diameter: 77 mms, 24 rolls on a pallet. Available widths: 91, 101, 155, 165, 185, 205, 220 cm. We supply this product per rolls (unit of measure - kg). The weight of individual rolls is different in a few percent range. The precise weight can be established while preparing the shipment. The minimal weight of one roll is [[[waga_min]]]. When ordering, it is ne

Cellulose paper 68 gr/m2, with a special glue, suitable for all kind of machines, sealer inside, standard roll length: 280 mts, inner core diameter: 77 mms, 24 rolls on a pallet. Available widths: 91, 101, 155, 165, 185, 205, 220 cm. We supply this product per rolls (unit of measure - kg). The weight of individual rolls is different in a few percent range. The precise weight can be established while preparing the shipment. The minimal weight of one roll is [[[waga_min]]]. When ordering, it is ne